• 6425

    ABS (Acrylonitrile butadiene styrene) is a thermoplastic with high impact resistance.  It comes on plastic spools with 2,3kg material on it, that is about 350m of filament. Diameter. 2.85mm +- 0.1mm

    43,43 €
     
  • 6426

    ABS (Acrylonitrile butadiene styrene) is a thermoplastic with high impact resistance.  It comes on plastic spools with 2,3kg material on it, that is about 350m of filament. Diameter. 2.85mm +- 0.1mm

    43,43 €
     
  • RRS-6517

    Polylactic acid (PLA) is a polymer made from corn starch. This makes it biodegradable and renewable. It extrudes at low temperatures, and deforms much less than other plastics as it cools. This filament is wound onto a practical big spool. Extruded in Germany Nominal Diameter: 2.9mm +- 0.1mm Extrusion temperature: ~180-210°C.

    53,27 €
     
  • Polylactic acid (PLA) is a polymer made from corn starch. This makes it biodegradable and renewable. It extrudes at low temperatures, and deforms much less than other plastics as it cools. This filament is wound onto a practical spool. Extruded in Germany Nominal Diameter: 2.9mm +- 0.1mm Extrusion temperature: ~180-210°C.

    53,27 €
     
  • Polylactic acid (PLA) is a polymer made from corn starch. This makes it biodegradable and renewable. It extrudes at low temperatures, and deforms much less than other plastics as it cools. This filament is wound onto a practical spool. Extruded in Germany Nominal Diameter: 2.9mm +- 0.1mm Extrusion temperature: ~180-210°C.

    53,27 €
     
  • ABS (Acrylonitrile butadiene styrene) is a thermoplastic with high impact resistance.  It comes on plastic spools with 2,3kg material on it, that is about 350m of filament. Diameter. 2.85mm +- 0.1mm

    49,17 €
     
  • Polylactic acid (PLA) is a polymer made from corn starch. This makes it biodegradable and renewable. It extrudes at low temperatures, and deforms much less than other plastics as it cools. This filament is wound onto a practical spool. Nominal Diameter: 2.9mm +- 0.1mm Extrusion temperature: ~185-210°C.

    53,27 €
     
  • RRS-6963

    ABS (Acrylonitrile butadiene styrene) is a thermoplastic with high impact resistance. It has a higher temperature resistance compared to PLA but it does have more warping while printed.

    49,17 €
     
  • 6929

    Polylactic acid (PLA) is a polymer made from corn starch. This makes it biodegradable and renewable. It extrudes at low temperatures, and deforms much less than other plastics as it cools.   This filament is wound onto a small practical spool. Extruded in Germany   Nominal Diameter: 1.75mm Extrusion temperature: ~180-210°C.

    23,76 €
     
  • RRS-6930

    Polylactic acid (PLA) is a polymer made from corn starch. This makes it biodegradable and renewable. It extrudes at low temperatures, and deforms much less than other plastics as it cools.   This filament is wound onto a small practical spool. Extruded in Germany   Nominal Diameter: 1.75mm Extrusion temperature: ~180-210°C.

    23,76 €
     
  • P750B-FF

    Polylactic acid (PLA) is a polymer made from corn starch. This makes it biodegradable and renewable. It extrudes at low temperatures, and deforms much less than other plastics as it cools.   This filament is wound onto a small practical spool. Extruded in Germany   Nominal Diameter: 1.75mm Extrusion temperature: ~180-210°C.

    23,76 €
     
  • P750W-FF

    Polylactic acid (PLA) is a polymer made from corn starch. This makes it biodegradable and renewable. It extrudes at low temperatures, and deforms much less than other plastics as it cools.   This filament is wound onto a small practical spool. Extruded in Germany   Nominal Diameter: 1.75mm Extrusion temperature: ~180-210°C.

    23,76 €
     
  • P750S-FF

    Polylactic acid (PLA) is a polymer made from corn starch. This makes it biodegradable and renewable. It extrudes at low temperatures, and deforms much less than other plastics as it cools.   This filament is wound onto a small practical spool. Extruded in Germany   Nominal Diameter: 1.75mm Extrusion temperature: ~180-210°C.

    23,76 €
     
  • RRS-6938

    Polylactic acid (PLA) is a polymer made from corn starch. This makes it biodegradable and renewable. It extrudes at low temperatures, and deforms much less than other plastics as it cools.   This filament is wound onto a small practical spool. Extruded in Germany   Nominal Diameter: 1.75mm Extrusion temperature: ~180-210°C.

    23,76 €
     
  • RRS-6939

    ABS (Acrylonitrile butadiene styrene) is a thermoplastic with high impact resistance.  It comes on plastic spools with 750g material on it, that is about 300m of filament.

    17,61 €
     
  • RRS-6951

    ABS (Acrylonitrile butadiene styrene) is a thermoplastic with high impact resistance.  It comes on plastic spools with 750g material on it, that is about 300m of filament.

    18,02 €
     
  • RRS-6962

    Polylactic acid (PLA) is a polymer made from corn starch. This makes it biodegradable and renewable. It extrudes at low temperatures, and deforms much less than other plastics as it cools. This filament is wound onto a practical big spool. Extruded in Germany Nominal Diameter: 2.9mm +- 0.1mm Extrusion temperature: ~180-210°C.

    53,27 €
     
  • A700B

    ABS (Acrylonitrile butadiene styrene) is a thermoplastic with high impact resistance.  It comes on plastic spools with 750g material on it, that is about 300m of filament.

    19,59 €
     
  • A750W

    ABS (Acrylonitrile butadiene styrene) is a thermoplastic with high impact resistance.  It comes on plastic spools with 750g material on it, that is about 300m of filament.

    19,59 €
     
  • RRS-6983

    ABS (Acrylonitrile butadiene styrene) is a thermoplastic with high impact resistance.  It comes on plastic spools with 750g material on it, that is about 300m of filament.

    19,59 €
     
  • RRS-6985

    ABS (Acrylonitrile butadiene styrene) is a thermoplastic with high impact resistance.  It comes on plastic spools with 750g material on it, that is about 300m of filament.

    19,59 €
     
  • RRS-6987

    ABS (Acrylonitrile butadiene styrene) is a thermoplastic with high impact resistance.  It comes on plastic spools with 750g material on it, that is about 300m of filament.

    19,59 €
     
  • RRS-6988

    ABS (Acrylonitrile butadiene styrene) is a thermoplastic with high impact resistance.  It comes on plastic spools with 750g material on it, that is about 300m of filament.

    19,59 €
     
  • RRS-6989

    ABS (Acrylonitrile butadiene styrene) is a thermoplastic with high impact resistance.  It comes on plastic spools with 750g material on it, that is about 300m of filament.

    19,59 €
     

Last Tweets

Accept

Using this site you accept using cookies.